STOP HAZARD SYSTEM

Emergency Eye Wash & Shower
Gravit-Eye ™ Portable Eye Wash Units Model 90306/ 90320

    *  Tank High density green polyethylene has heavy wall construction and reinforced ribs to support weight of unit.
    *  Approximate dimensions : 20 ½” x H 21” W x19” D.
    *  Eye Wash Solution: Fill with clean potable water and add Redi-Sep ® bacteriostatic additive furnished with unit.
    *  Outlet Heads: Integral full flow nozzles.
    *  Drain: Water is directed into drain opening in tank basin. 3 ft. long drain hose in basin directs discharge into
        floor drain, storage tank or other receptor.
    *  Mounting: Furnished with zinc plated steel bracket for wall mounting or resting on flat surface.
    *  Meets ANSI Z358.1 Standards for Eyewash.
    *  6 Gallon Personal Eye Wash Station (13 lbs.) Model 90306.
    *  Gallon Personal Eye Wash Station (17 lbs.) Model 90306.

Eye Wash Units
Rapid-ClearTM Personal Eye Wash Bottle Stations Model 90331/ 90332/ 90333

    *  Personal Eye Wash Sterile Solution.
    *  Ideal for emergency first response.
    *  Easy wall mount.
    *  Fast, Simple and Effective.
    *  Single 16 oz. Bottle Station (FDA Approved) Model 90331.
    *  Single 32 oz. Bottle Station (FDA Approved) Model 90332.
    *  Double 32 oz. Bottle Station (FDA Approved) Model 90333.

 Portable Safety Stations
 SentryWash ® Portable Safety Stations Model 90312 / 90305
    *  Stainless Steel Tank.
    *  Built in carrying handles.
    *  Air intake fitting, pressure gauge and automatic pressure relief valve.
    *  8 oz. Bottle of bacteriostatic additive included (keeps water viable up to 6 month).
    *  Lightweight - weights only 14 lbs.
    *  Meets ANSI Z358.1 Standards.
    *  10 Gal. Portable Drench Hose Unit (26 lbs) Model 90312.
    *  5 Gallon Portable Drench Hose Unit (14 lbs.) Model 90305.

Eye/ Face Wash Units
SentryWash Pedestal Mounted Eye/Face Wash Units
    *  Outlet Head Assembly: 2 or 4 outlet heads, each head has self-regulating flow control
       (to assure soft, balanced flow), filter to remove debris from water, and float-off dust cover.
       All wearing components are located in head for ease of service. Heads are mounted on
       chrome plated supply arms.
    *  Valve: 1/2" IPS chrome plated brass stay-open ball valve. Activated by epoxy coated cast
       aluminum flag handle, made in the USA.
    *  Bowl: 11 1⁄2" stainless steel.
    *  Mounting: 1 1⁄4" IPS hot-dipped galvanized steel pipe and fittings, 9" aluminum floor flange.
    *  Supply: 1/2" IPS male inlet.
    *  Waste: 1 1⁄4" IPS female outlet.
    *  Quality Assurance: Valve, bowl and head assembly are factory assembled and individually
       water tested prior to shipment.
    *  Meets ANSI Z358.1-2004 Standards.

Emergency Shower
SentryWash ® Eye Wash & Shower Safety Station

    *  Shower Head: 10" blue ABS plastic shower head delivers 30 gPM at 30 PSI.
       Spray pattern is 20" diameter at 60" above floor.
    *  Shower Valve: 1" IPS chrome plated brass stay-open ball valve, furnished with
       stainless steel actuating arm and stainless steel pull rod. Valve is made in the USA.
    *  Eye Wash Outlet Head Assembly: Two outlet heads. Each head has self-regulating
       flow control (to assure soft, balanced flow), filter to remove debris from water, and
       float-off dust cover. All wearing components are located in head for ease of service.
       Heads are mounted on chrome plated brass supply arms.
    *  Eye Wash Bowl: 11 1/2" stainless steel.
    *  Eye Wash Valve: 1/2" IPS chrome plated brass stay-open ball valve. Activated by epoxy
       coated cast aluminum flag handle. Valve made in USA.
    *  Pipe and Fitting: 1 1/4" IPS Schedule 40 hot-dipped galvanized steel pipe and fittings
       with 9" cast aluminum floor flange.
    *  Supply: 1g" IPS female top or side inlet.
    *  Waste: 1 1/4" IPS female outlet.
    *  Quality Assurance: Eye wash frame is factory assembled and individually water tested prior to shipment.
    *  Meets ANSI Z358.1-2004 Standards.